SMAR TP301 - FAIL SAFE (Alarm Selection)

Local Adjustment Programming
3.9
Figure 3.8 – TP301 Configuration Screen
- DDCON 100 - DDL Based HART Configurator
To configure see the manual in the site: http://www.smarresearch.com.
Figure 3.9 – DDCON 100 - DDL Based HART Configurator
FAIL SAFE (Alarm Selection)
The Fail Safe parameter is set by using the configurators only. It allows to the user to configure the
TP301 to alarm when the current is as lows as 3.6 mA or as high as 21 mA.