Need help?Do you have a question about the SMAR ld301 and is the answer not in the manual?
General| Type | Differential Pressure Transmitter |
|---|---|
| Communication Protocol | HART |
| Output Signal | 4 to 20 mA, HART |
| Power Supply | 12 to 45 Vdc |
| Process Connection | 1/4 NPT, 1/2 NPT, G1/2 |
| Material | 316L SST |
| Temperature Range | -40 to 85°C / -40 to 185°F |
| Process Temperature | -40 to 120°C / -40 to 248°F |
| Ambient Temperature | -40 to 85°C / -40 to 185°F |
| Housing Material | Aluminum |
Covers general principles and specific instructions for installations in hazardous areas.
Lists features, data, and covers trimming and calibration of variables.
Explains unit selection, flow measurement functions, and totalization setup.
Explains PID algorithm, tuning, modes, and equipment configuration options.
Details adjustment within operation, tuning, configuration, trim, and escape branches.
Provides guidelines, diagnostic tools, and error message interpretation.
To Next Page
