Programming Using Local Adjustment
4.13
After entering the "password," you can move around the options listed in the table below using (Z). T o
select the desired option, activate (S). See Table 4.6.
OPERATION MODES
DISPLAY DESCRIPTION
XMTR Transmitter
PID Controller
ESC escape
Table 4.6 - Operation Modes
Escape (ESC)
Z: Recycles back to the function Display 1 (LCD_1).
S: Escapes to the MAIN menu.
Totalization [TOTAL]
This branch is common for both the Transmitter and the Controller modes. Totalization parameters are
configured via HART Configurator, because it requires a more elaborate human-machine interface, as
described on Section 3. The functions available in this branch are directly related with the totalized
value, these being stopping or continuing the totalization process and zeroing the totalized value. See
Figure 4.8.
Figure 4.8 – Local Totalization Tree
Totalization Branch (TOTAL)
Z: Moves to the Pressure TRIM branch.
S: Enters the totalization branch, starting with function Total on/ off.
Totalization ON-OFF (TOTAL)
Z: Moves to the RESET function.
S: Toggles the totalization On to Off or Off to On.
To Next Page
Loading...
