SMAR TP301 - Local Adjustment

TP301 – Operation, Maintenance and Instructions Manual
3.2
Figure 3.2 - W2 and W1 Jumpers
Local Adjustment
Local Configuration Tree
The Local Adjustment Configuration Tree, as per Figure 3.3, shows possesses the available
functions in the equipment.
Step 1
To configure the functions, it is enough to maintain the magnetic tool in Z; in that way it will browse
all the available functions. See the available functions in the figure 3.3.
Step 2
When the indicator shows the function the user wants to change, remove the tool and insert it in the
orifice S. If there are more options on this particular function, just keep the magnetic tool in that
orifice, to browse the functions submenus.
Step 3
To select an option of this submenu, remove the magnetic tool and to insert it again in the orifice Z.
To act in other functions, wait until the display shows the main tree branch and remove the tool to
exit the Local Adjustment.
NOTE
Remove the Magnetic Tool of the orifice to Save (to execute) the selected option.
When the display shows the symbol ACK: option was accepted.