Chapter 1 Welcome
docs.smarttech.com/kb/171875 10
The display comes with SMART software that you can install on connected computers to take full
advantage of the display’s features while using the connected computers.
For more information, see
Connecting room computers and guest laptops
on page34.
Accessory slot
You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot.
SMARTOPS PC modules provide a complete Windows
®
Pro installation.
For more information about SMART OPS PC modules, see SMART OPS PC module.
Convenience panel
The convenience panel provides buttons for
turning the display on and off, controlling the
volume, freezing and unfreezing the screen,
and muting and unmuting the microphone. It
also includes connectors for USB peripherals
and a computer or other input source. See
Connecting room computers and guest laptops
on page34.
For more information about the convenience
panel, see
Using the convenience panel
on page18.
Proximity sensor
The proximity sensor is located in the top-right
corner of the display’s frame. It’s the sensor on the
right.
The proximity sensor can detect people up to
approximately 16' (5 m) away when the display is in
an energy saving mode.
When the proximity sensor detects people in the
room, the display turns on, depending on how it’s
configured.
If the room is empty for a specified period, the
display returns to an energy saving mode.
To Next Page
Loading...
Need help?
General
