SMART Board 6000S Series - Display; Audio; Network Connectivity

Chapter 1 Welcome
smarttech.com/kb/171415 12
Remote control and IR sensor
You can use the remote control to turn the display on and off, adjust
display settings, and so on.
On SMART Board 6000S (V3) models, the IR sensor is located in the
top-right corner of the display’s frame. On the 6000S and 6000S (C)
models, the sensor is in the top-left corner.
For more information about the remote control, see Using the remote
control on page22.
Temperature and humidity sensors
The display features integrated temperature and humidity sensors that can provide
real-time measurement and recording of the display’s environmental conditions. This
data is easily accessible using the temperature and humidity app in the display’s App
library.
Note
Temperature and humidity sensors are available only when iQ is enabled.
For more information, see Using the SMARTSensors app on page42.
Microphone array
This feature is available only on the SMART Board 6000S (V3) and SMART Board 6000S (V3)
Pro models.
Note
The SMART Board 6400S (V3) Pro models do not include a microphone array.
You can use the display’s built-in microphone array while using a conferencing app on the display. The
microphone array provides improved sound detection. You can also use the display’s built-in
microphone array in place of a connected computer’s microphone.
For more information, see Using the microphone array on page29.