SMART Board 6000S Series User Manual

Chapter 1
Welcome
smarttech.com/kb/171415 15
Temperature and humidity sensors
The display features integrated temperature and humidity sensors that enable real-time
measurement and recording of the environmental conditions surrounding the display.
This data is easily accessible using the temperature and humidity app in the display’s App
library.
NOTE
Temperature and humidity sensors are available only when iQ is enabled.
For more information, see Using the SMARTSensors app on page42.
Microphone array
This feature is available only on the SMART Board 6000S (V3) and SMART Board 6000S (V3)
Pro models.
NOTE
The SBID-64xxS (V3) Pro models do not feature a microphone array.
You can use the display's built-in microphone array while using a conferencing app on the display. The
microphone array provides improved sound detection. You can also use the display's built-in microphone
array in place of a connected computer's microphone.
For more information, see Using the microphone array on page32.
NFC sign in
The display allows you to sign in to your SMART Account using NFC (near field communication): just tap your
SMART ID card on the screen and enter a PIN. This feature helps you save time signing in to your account
without typing your username and password.
This feature will be enabled in iQ system software in 2022.

SMART Board 6000S Series Specifications

General

Resolution	4K UHD (3840 x 2160)
Screen Sizes	65", 75", 86"
Aspect Ratio	16:9
Touch Points	20
Brightness	350 cd/m²
Contrast Ratio	4000:1
Response Time	8 ms
Wall Mountable	Yes
Connectivity	HDMI, USB, VGA, DisplayPort
Operating System	Android