SMART Board 6000S Series User Manual

Chapter 2
Using basic features
smarttech.com/kb/171415 24
Using the convenience panel
The convenience panel contains buttons for turning the display on and off, controlling the volume, freezing
and unfreezing the screen, and showing and hiding a screen shade. It also includes connectors for USB
peripherals and a computer or other input source.
SMART Board 6000S (C) and 6000S (V3)
SMART Board 6000S
No. Name Procedure
1 Power
l
Press to wake the display or put it back in to an energy saving mode
(see Waking up the display and putting it back in to an energy saving
mode on page21).
l
Press and hold for five seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
NOTE
Resetting the display does not change any user settings or delete
saved files.
2 Volume increase Press to increase the volume (see Adjusting the volume on page31).
3 Volume decrease Press to decrease the volume (see Adjusting the volume on page31).
4
Freeze
Press to freeze and unfreeze the screen (see page33).
5
Screen shade
Press to hide screen contents behind a screen shade (see Showing
and hiding the screen shade on page34).
6 USB Type A
connector
Connect USB drives and other devices that you want to use with the
iQ experience or a connected computer (see Connecting USB drives,
peripherals, and other devices on page53).

SMART Board 6000S Series Specifications

General

Resolution	4K UHD (3840 x 2160)
Screen Sizes	65", 75", 86"
Aspect Ratio	16:9
Touch Points	20
Brightness	350 cd/m²
Contrast Ratio	4000:1
Response Time	8 ms
Wall Mountable	Yes
Connectivity	HDMI, USB, VGA, DisplayPort
Operating System	Android