Chapter 2
Using basic features
smarttech.com/kb/171415 25
No. Name Procedure
7 HDMI 3 input
connectors
Connect a computer or other input source to use with the display
(see page49).
8 USB Type-C
connector
Connect a computer or mobile device, with a single connection for
touch, video, and audio. Also connect any USB Type-C peripheral
(such as memory sticks, keyboard, mice, etc.) to use with the display
(see page49).
The Power button’s color indicates the display’s status:
Power button Display status
Off Not receiving power
Amber In an energy saving mode
White In normal operating mode
Using the remote control
The display comes with one of two infrared remote control models. These models are similar, except one
has a screen sharing button.
Use the infrared remote control to turn the display on or off, change the input source, change the volume,
access the display’s iQ apps, and more. You can also use the remote control to open the on-screen menus
and change the display’s settings.
IMPORTANT
l
Do not subject the remote control to strong shock.
l
Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l
Do not expose the remote control to heat or steam.
l
Do not open any part of the remote control other than the battery compartment.
The image and table below list the remote control’s functions.
To Next Page
Loading...
Need help?
General
