smartmeter S10 53
Press F3.
A screen keyboard opens.
Use the buttons ◄/► and ▲/▼ to mark a letter and confirm each letter
with OK.
Repeat until you have the desired name.
Standard show special letters
Caps on switch between capital and small letters
Back delete last letter
OK Save satellite name
Cancel exit without saving
Mark the item OK and confirm with the OK-button.
8.4 Search Transponder
Choose the satellite you’d like to search transponders on with the buttons
▲ and ▼.
Confirm by pressing OK.
In this menu you can see the signal quality of single transponders. Use this
menu to allign a satellite dish.
By pressing F1 you can delete a marked transponder.
By pressing F2 you start the transponder search and after aprox. 5 sec can
watch the TV signal of the marked transponder.
By pressing F3 or F4 you can choose the DiSEqC-Port or the LNB-Type.
To Next Page
Loading...
Need help?
General
