58 smartmeter S10
13 Spectrum
Press the MENU-button.
Use the buttons ◄ / ► and ▲ / ▼ select the menu item Spectrum and
confirm your selection with the OK button.
In this menu you can control the signal quality of different transponders over
the whole spectrum.
Choose the LNB-Type with the button F1.
Switch 22 kHz On or Off with F2.
Choose the polarization with the button F3.
Choose the sampling steps with the button F4.
4M STEP: precise scan, duration approx. 10sec.
16 M STEP: duration approx. 3sek., medium precise
To Next Page
Loading...
