SMART S10 User Manual

Packet Control
smartmeter S10 55
 Press F1 to watch TV on the choosen transponder.
 Change the transponder with the button F3.
 Choose the DiSEqC-Port with the button F3.
 Choose the LNB-Type with the button F4.
The name of the satellite from which you receive signal is displayed. Also the
signal strength of this satellite is displayed.
10 Packet Control
 Press the MENU-button.
 Use the buttons ◄ / ► and ▲ / ▼ select the menu item PACKET
CONTROL and confirm your selection with the OK button.
 Press OK to display the list of satellites.
 Use the buttons ▲ and ▼ to choose a satellite.
 Choose the DiSEqC-Port with the button F3.
 Choose the LNB-Type with the button F4.
Now you can see the signal strength (S) and signal quality (Q) of five
transponders.
By pressing the buttons ◄ and ► you can jump from page to page.

SMART S10 Specifications

General

Brand	SMART
Model	S10
Category	Measuring Instruments
Language	English