EasyManua.ls Logo

SMART S10 - Technical Specifications; LNB;Tuner Input; Power Supply

SMART S10
76 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
smartmeter S10 73
28 Technical specifications
28.1 LNB/Tuner input
F-type connector IEC 169-24
Frequency range 950 MHz ~ 2150 MHz
Input level -65 dBm bis -25 dBm
LNB power supply 13/18 V, max. 700 mA
LNB control signal 22 kHz
DiSEqC control yes
28.2 Demodulator
Front-end-modul QPSK
Symbol rate 2 Mbps bis 45 Mbps
28.3 System resource
CPU 216MHz
SDRAM 1PC 16M X16bit/16Mbyte DDR
FLASH 1PC 16bit/4MByte
28.4 Video-Decoder
Data rate bis zu 15 Mbit/s
Video resolution 720×576(PAL) 720×480(NTSC)
Video format PAL, NTSC, SECAM
28.5 Connectors
Serial data interface USB
28.6 Power supply
Supply voltage 12,6 V
Li-oN battery 2700 mAh
Supply voltage (charger) 100 - 240 V ~, 50/60 Hz
28.7 Dimensions
Length x width x height 10,3 x 16,7x 4,5 cm

Table of Contents

Related product manuals