56 smartmeter S10
11 DiSEqC Search
Press the MENU-button.
Use the buttons ◄ / ► and ▲ / ▼ select the menu item DiSEqC Search
and confirm your selection with the OK button.
Choose the DiSEqC-Port with the button F1.
With F2 the allocation of the 16 DiSEqC-Ports is displayed.
Choose the LNB-Type with the button F4.
The DiSEqC-Search starts automatically.
At every port the name of the received satellite is displayed.
You can select single ports by pressing F1 and can the switch to the menu
Transponder Search by pressing OK.
To Next Page
Loading...
