Smartgen HGM9520N - Page 79

HGM9520N Genset Paralleled Controller User Manual Page 79 of 111
No.
Type
Description
“Sync Drop Volt”.
65
PWM Speed Raise
When output type of GOV is set as “Relay output”, controller
adjusts speed and power via “Sync Raise Speed” and “Sync
Drop Speed”.
66
PWM Speed Drop
67
Reserved
68
Reserved
69
Digital Input 1 Active
Act when input port 1 is active.
70
Digital Input 2 Active
Act when input port 2 is active.
71
Digital Input 3 Active
Act when input port 3 is active.
72
Digital Input 4 Active
Act when input port 4 is active.
73
Digital Input 5 Active
Act when input port 5 is active.
74
Digital Input 6 Active
Act when input port 6 is active.
75
Digital Input 7 Active
Act when input port 7 is active.
76
Digital Input 8 Active
Act when input port 8 is active.
77
Digital Input 9 Active
Act when input port 9 is active.
78
Digital Input 10 Active
Act when input port 10 is active.
79
Reserved
80
Reserved
81
Exp DI Input 1 Active
Act when expansion digital input 1 is active.
82
Exp DI Input 2 Active
Act when expansion digital input 2 is active.
83
Exp DI Input 3 Active
Act when expansion digital input 3 is active.
84
Exp DI Input 4 Active
Act when expansion digital input 4 is active.
85
Exp DI Input 5 Active
Act when expansion digital input 5 is active.
86
Exp DI Input 6 Active
Act when expansion digital input 6 is active.
87
Exp DI Input 7 Active
Act when expansion digital input 7 is active.
88
Exp DI Input 8 Active
Act when expansion digital input 8 is active.
89
Exp DI Input 9 Active
Act when expansion digital input 9 is active.
90
Exp DI Input 10 Active
Act when expansion digital input 10 is active.
91
Exp DI Input 11 Active
Act when expansion digital input 11 is active.
92
Exp DI Input 12 Active
Act when expansion digital input 12 is active.
93
Exp DI Input 13 Active
Act when expansion digital input 13 is active.
94
Exp DI Input 14 Active
Act when expansion digital input 14 is active.
95
Exp DI Input 15 Active
Act when expansion digital input 15 is active.
96
Exp DI Input 16 Active
Act when expansion digital input 16 is active.
97-98
Reserved
99
Emergency Stop
Act when emergency stop alarm occurs.
100
Fail To Start
Act when start failure alarm occurs.
101
Fail To Stop
Act when stop failure alarm occurs.
102
Under Speed Warn
Act when under speed alarm occurs.
103
Under Speed Shutdown
Act when under speed alarm (except warning) occurs.
104
Over Speed Warn
Act when over speed warning occurs.