Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way
audio function, make sure the video mode is set to “MPEG-4” on the Audio and Video Settings
page and the media option is set to “Video and Audio” on the Client Settings page. Please refer
to Client Settings on page 33 and Audio and Video Settings.
Click
to enable audio transmission to the Network Camera; click to adjust the volume
of microphone; click
to turn o the audio. To stop talking, click again.
FTP
The FTP server allows the user to save recorded video clips. You can utilize Smartvue
Installation Wizard to upgrade the rmware via FTP server. By default, the FTP port is set to
21. It also can be assigned to another port number between 1025 and 65535.
To Next Page
Loading...