Video clip: Select to send video clips when a trigger is activated.
■ Source: The source of video clip, which will be identical to the time shift caching stream. For
more information about time shift caching stream, please refer to page 66.
■ Pre-event recording
The Network Camera has a buer area; it temporarily holds data up to a certain limit. Enter a
number to decide the duration of recording before a trigger is activated. Up to 9 seconds can
be set.
■ Maximum duration
Specify the maximum recording duration in seconds. Up to 10 seconds can be set.
For example, if pre-event recording is set to five seconds and the maximum duration is
set to ten seconds, the Network Camera continues to record for another 4 seconds after a
trigger is activated.
■ Maximum le size
Specify the maximum le size allowed.
■ File name prex
Enter the text that will be appended to the front of the le name.
For example:
Click Save to enable the settings, then click Close to exit the page.
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page.
To Next Page
Loading...