HRX-OM-W058
Chapter 5 Display and setting of various functions
5.16 Alarm customize function HRS-R Series
Range over detection timer; Setting and Checking
35. Press the [SEL] key once.
Setting screen of the range over detection timer is displayed on the digital display.
36. Select range over detection timer from the table below with [▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.16-19 List of set value
Initial value
(Default setting)
Sets time from detecting the alarm to
generation of the alarm.
Setting unit is 1 second.
Settings of this function and example of alarm generating timing for 5.15.3 "Setting of
temperature alarm monitoring method and generation timing".
37. Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
To Next Page
Loading...
Need help?
General
