SMC Networks HRS018-A 20 R Series - Chapter 3 Transport and Setting Up; 3.1 Transport

HRX-OM-W058
Chapter 3 Transport and Setting Up
HRS-R Series 3.1 Transport
3-1
Chapter 3 Transport and Setting Up
3.1 Transport
The product is heavy and has potential danger at transport. Also, to prevent
damage and breakage of the product, be sure to follow these instructions for
transport.
 Only persons who have sufficient knowledge and experience
about the product and system are allowed to transport and set up
the product.
 Especially pay attention to personal safety.
Never lay the product on its side.
The compressor oil will leak in to the refrigerant piping, which may
cause early failure of the compressor.
 Drain the residual fluid from the piping as much as possible to
prevent any spillage.