HRX-OM-W058
Chapter 5 Display and setting of various functions
HRS-R Series 5.10 Function to recover from power failure
5.10.2 Function to recover from power failure setting and checking
The table below explains the setting items of the power recovery function
and the initial values.
Table 5.10-1 List of set function to recover from power failure
Initial value
(Default setting)
Recover from
power failure
Sets recover from power
failure.
1. Press and hold the [MENU] key for approx. 2 sec.
Repeat pressing the key until the setting screen for key-lock [ ] appears on the
digital display.
Recover from power failure Setting and checking
2. Press the [SEL] key 8 times.
The set screen of recover from power failure is displayed on the digital display.
3. Select recover from power failure from the table below with [▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.10-2 List of set value
Intial value
(Default setting)
Function to recover from power failure OFF
Function to recover from power failure ON
4. Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
To Next Page
Loading...
Need help?
General
