HRX-OM-W058
Chapter 5 Display and setting of various functions
5.19 Communication function HRS-R Series
62. Select contact output signal 3 selected alarm from the table below with [▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.19-32 List of set value
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of digial output 3 is selected
alarm status signal.
Sets selected alarm
Set range is AL.01 to AL.36.
63. Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
To Next Page
Loading...
