SMC Networks ISA3 Series User Manual

4 How to use
-54-
No.PS※※-OMW0009-A
■[F 0] Selection of the display unit and switch output specifications
This setting is only available for models with the units selection function.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 0].
Press the SET button. Move on to display unit setting.
Display unit setting
Press the UP or DOWN button to select the display unit.
: kPa can be selected if the product does not have the unit selection function.
Press the SET button to set.
Switching setting of switch output NPN/PNP specifications
The switch output of this product can be switched to NPN or PNP output in accordance with the
user device construction.
Press the UP or DOWN button to select switch output specification.
Press the SET button to set. Return to function selection mode.
[F 0] Selection of the display unit and switch output specifications is completed
●Available display unit and minimum set value
Unit
Min. set value
kPa
0.1
bar
0.001
psi
0.01
Move on to the switch output NPN/PNP
specification switching setting.

SMC Networks ISA3 Series Specifications

General

Brand	SMC Networks
Model	ISA3 Series
Category	Switch
Language	English