SMC Networks ISA3 Series User Manual

4 How to use
-57-
No.PS※※-OMW0009-A
■[F 2] Setting of OUT2
The setting of Output OUT2 can be performed.
Pressure detection on the OUT port or pressure detection or distance detection on the SUP port can be set.
Please refer to the "List of output modes" on page 60 for the relationship between the set items and operation.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 2].
Press the SET button. Move on to output setting.
Output setting
Press the UP or DOWN button to select the desired output mode.
Press the SET button to set. Move on to output mode setting.
Output mode setting
Press the UP or DOWN button to select the required output mode.
•When distance detection, SUP port side pressure or OUT port side
pressure is selected
•When other items are selected
Press the SET button to set. Move on to reversed output setting.
[OFF] Switch output
OFF is selected
Press the SET button
to move on to display
colour setting.

SMC Networks ISA3 Series Specifications

General

Brand	SMC Networks
Model	ISA3 Series
Category	Switch
Language	English