-9-
No.PS##-OML0003-B
○Options/Part number
If an option is required independently, order with the following part number.
Description Part number Remarks
Bracket A ZS-38-A1 Mounting screw (M3 × 5 L, 2 pcs.)
Bracket B ZS-38-A2 Mounting screw (M3 × 5 L, 2 pcs.)
Bracket C ZS-38-A3 Mounting screw (M3 × 5 L, 2 pcs.)
Panel mount adapter ZS-27-C Mounting screw (M3 × 8 L, 2 pcs.)
Panel mount adapter + Front protective cover ZS-27-D Mounting screw (M3 × 8 L, 2 pcs.)
Connector attached lead wire ZS-38-3L 3 cores for 1 output, 2 m
Connector attached lead wire ZS-38-4L 4 cores for 2 outputs, 2 m
Connector attached lead wire and connector cover ZS-38-3G 3 cores for 1 output, 2 m
Connector attached lead wire and connector cover ZS-38-4G 4 cores for 2 outputs, 2 m
Connector attached lead wire for copy ZS-38-5L 3 cores for copy, 1 m
Connector attached lead wire unit for copy ZS-38-U For copy (For 10 slaves at the max.)
Front protective cover ZS-27-01 -
One-touch fitting φ4 mm straight ZS-38-C4H O-ring and One-touch clip enclosed
One-touch fitting φ6 mm straight ZS-38-C6H O-ring and One-touch clip enclosed
One-touch fitting φ1/4 inch straight ZS-38-N7H O-ring and One-touch clip enclosed
One-touch fitting φ4 mm elbow ZS-38-C4L O-ring and One-touch clip enclosed
One-touch fitting φ6 mm elbow ZS-38-C6L O-ring and One-touch clip enclosed
One-touch fitting φ1/4 inch elbow ZS-38-N7L O-ring and One-touch clip enclosed
To Next Page
Loading...
Need help?
General
