SMC Networks ZSE30A(F) - Product Parts Overview and Identification; Component Identification (LCD, Indicators, Buttons)

-10-
No.PS##-OML0003-B
Summary of Product parts
○Names of individual parts
Indication light (Green OUT1 and Red OUT2): Displays switch operation condition.
LCD display: Displays the current status of pressure, setting mode, selected indication unit and error
code. Four display modes can be selected: display always in red or green only, or changing
from green to red, red to green linked to output.
button: Alters the mode or increases ON/OFF set value.
Press this button to change to the peak display mode.
button: Alters the mode or decreases ON/OFF set value.
Press this button to change to the bottom display mode.
button: Press this button to change to either mode and to set a set value.
Unit indication: Displays the current specification of unit. (Only for kPa and MPa indication unit)