SMC Networks ZSE30A(F) - Reset to Default Settings ([F99]); Procedure for Factory Reset

-43-
No.PS##-OML0003-B
■[F99] Reset to the default setting
When the setting of the pressure switch becomes unsure, the default setting can be returned.
<Operation>
Press the
or button in function selection mode to display [F99].
Press the button. Move on to reset to the default setting.
[oFF] (unused) selected
Press the
button to set
Return to function selection
mode.
The setting is reset to the
default setting, and the mode
returns to the function
selection mode.
Setting of [F99] reset to the default setting completed
Reset to the default setting
Display [ON] with pressing the
or button,
then press the
and buttons for 5 seconds
or longer simultaneously.