-25-
No.PS##-OML0003-B
•[F 2] Parameter setting of OUT2 See page 30
Same setting as [F 1] OUT1.
Display color is linked to the setting of OUT1, and can not be selected.
•Other parameter setting
Item Page Default setting
[F 3] Setting of response time See page 30 2.5 ms
[F 4] Setting of display resolution See page 31 1000-split
[F 5] Setting of auto-preset See page 32 Manual
[F 6] Setting of fine adjustment of display value See page 34 0%
[F 7] Setting of power saving mode See page 35 OFF
[F 8] Setting of security code See page 36 OFF
[F90] Setting of all functions See page 37 OFF
[F97] Selection of copy function See page 39 OFF
[F98] Check of output See page 41 Normal
[F99] Reset to the default setting See page 43 OFF
To Next Page
Loading...
