Need help?Do you have a question about the SMC Networks ZSE30A(F) and is the answer not in the manual?
General| Brand | SMC Networks |
|---|---|
| Model | ZSE30A(F) |
| Category | Measuring Instruments |
| Language | English |
Explains hazard levels (Caution, Warning, Danger) and user's responsibility for product compatibility and training.
Covers safety during service, restart procedures, and precautions for special operating environments.
Details the product's intended use in manufacturing and outlines the limited warranty and disclaimer.
Covers compliance requirements related to weapons manufacturing and international export laws.
Provides essential warnings regarding disassembly, modification, and operation outside specified limits.
Highlights safety measures for electrical connections, terminals, and during maintenance procedures.
Provides guidance on product specifications like power supply, voltage, load limits, and general handling.
Details procedures for installing piping using one-touch fittings and best practices for wiring connections.
Outlines acceptable environmental conditions, including protection against corrosion, oil, and surge effects.
Covers measures for environmental protection, sunlight exposure, and operational settings like adjustment.
Breaks down the model number structure, explaining codes for pressure range, piping, output, and unit specifications.
Details the available accessory options such as mounting brackets, panel adapters, and lead wires.
Identifies and labels the main components of the pressure switch, including the display, indicator lights, and buttons.
Defines terms related to display indications, operational modes, and specific functions like Auto Preset and Chattering.
Explains terms related to performance metrics and settings, such as F.S., Hysteresis, Resolution, and Fine Adjustment.
Details operating modes and output types, including Normal, NPN, PNP, and Operating modes.
Describes output impedance, output style, and peak value indication characteristics.
Explains terms related to pressure setting, function settings, and the Zero Clear functionality.
Provides instructions and diagrams for mounting the pressure switch using brackets A and B.
Details the one-touch fitting installation process and provides safety warnings for static charge.
Guides on proper wiring, separate routing, and noise prevention measures for reliable operation.
Explains how to connect and disconnect the electrical connector and provides pin assignment details.
Illustrates internal circuits and wiring examples for NPN and PNP open collector outputs.
Explains the measurement mode and how ON/OFF points are set based on pressure and hysteresis.
Details how to enter and navigate the function selection mode to access various settings.
Covers setting the display unit and configuring parameters for Output 1.
Configures output mode (Hysteresis/Window), reversed output, and pressure set points for OUT1.
Illustrates the operational logic for Normal and Reversed output modes (Hysteresis/Window).
Allows selection of response time to prevent output chattering and optimize performance.
Enables changing the pressure display resolution to reduce flickering and improve readability.
Allows configuration of the Auto-Preset function for automatic pressure value calculation.
Enables manual fine adjustment of the displayed pressure value within ±5%R.D.
Allows selection of the power saving mode to reduce power consumption.
Enables or disables the security code function to prevent unauthorized setting changes.
Allows setting all functions in series, enabling or disabling them as a group.
Provides a reference list of all available functions and their applicability to different models.
Details wiring connections for the copy function and how to select and enable it.
Allows selection between normal output confirmation and forced output testing.
Explains the procedure to reset all settings back to their factory default values.
Covers functions for holding peak/bottom pressure values and resetting the display to zero.
Details how to lock and unlock the device's settings without requiring a security code.
Describes product behavior after power loss and the procedure for replacing one-touch fittings.
Provides the procedure to recover access to the device if the security code is forgotten.
Guides on diagnosing issues like no operation, incorrect output status, and chattering.
Addresses problems with indication lights, slow response times, and error signal indications.
Correlates output status with indication, wiring faults, and potential model selection errors.
Diagnoses causes of chattering, slow response, and incorrect settings like hysteresis and response time.
Guides on resolving analog output issues and errors related to over/under pressure conditions.
Addresses display fluctuations, indicator issues, and differences in pressure readings between units.
Covers troubleshooting for noise, unit change lock, button operation, and copy function failures.
Details error codes (Er1, Er2, Er3, HHH) and their corresponding troubleshooting methods.
Explains system error codes (Er0, 4-9) related to internal data issues and provides solutions.
Provides key specifications for pressure ranges, applicable fluids, power supply, and output types.
Details environmental operating conditions, enclosure type, insulation resistance, and lead wire characteristics.
Lists port sizes, wetted part materials, and weights for various piping configurations.
Presents graphs illustrating the voltage and current output characteristics against pressure.
Shows dimensional drawings of the main body and common fitting types (01/N01, C4H/C6H).
Provides detailed dimensions for the installation of Bracket C.
Specifies the required panel cutout dimensions for single and multiple unit installations.
To Next Page
