-28-
No.PS##-OML0003-B
Press the button to set. Move on to setting of display color.
Press the button to set. Return to function selection mode.
Setting of [F 1] operation of OUT1 completed
∗1: Selected parameter become effective after pressing the button.
∗2: After having setting effective by the
button, it is possible to move to measurement mode by pressing the button for
2 seconds or longer.
Setting of hysteresis
Press the
or
button to select hysteresis.
Setting of display color
Press the
or
button to select display color.
To Next Page
Loading...
