SMC Networks PME-500-TR - User Manual

SMC Networks PME-500-TR Specifications

General

Brand	SMC Networks
Model	PME-500-TR
Category	Measuring Instruments
Language	English

Summary

Connecting the PME-500-TR to the Breaker

Initial Equipment Setup

Breaker Identification Data

Test Setup

Operation Sequence Selection

Command Duration Settings

Trigger Event Configuration

Setting the event that initiates test timing and recording.

Test Execution

Time & Coil Current Analysis

Recording main contacts, auxiliary inputs, and coil currents.

Test Procedure Steps

Step-by-step guide for executing tests.

Error and Status Messages

Test-Related Messages

Lists messages like Error During Test, Test Done, Switch Incorrect.

Technical Characteristics

Input Section Specifications

Measurement Specifications

Test Results

On-screen Viewing of Results

Displaying graphical and numerical test results on the screen.

Printing the Test Report

Storing and Retrieving Tests

Saving and recalling test data to/from memory.

Using the PC Software

Using EuroBREAKER Software

Basic Troubleshooting

Physical Equipment Overview

Internal Fuses Identification

Locating and identifying internal fuses.

Problems, Causes, and Solutions

Unit Power-Up Issues

Symptoms, causes, and solutions for power-up problems.

Performance and Display Issues

Solutions for poor performance or no display.

Touch Panel and Printing Issues

Command Execution and Test Start Issues

Resolving issues with command execution and test start.

Troubleshooting Procedures

Resetting the Display Contrast

Procedure to reset and adjust display contrast.

Adjusting the Display Contrast

Resetting the Microprocessor

Steps to recover from a frozen microprocessor.

CLOSE & TRIP Command Duration

Setting valid command duration values for testing.

Rechargeable Battery Issues

Procedures for battery charging and synchronization.