SMC Networks ZSE30A(F) - Setting Security Code ([F8]); Configuring Security Code Lock Function

-36-
No.PS##-OML0003-B
■[F 8] Setting of security code
Security code can be entered during the key lock is released.
<Operation>
Press the
or button in function selection mode to display [F 8].
Press the button. Move on to setting of security code.
Press the button to set. Return to function selection mode.
Setting of [F 8] security code completed
If the security code is used, it is necessary to input the security code to release the key lock.
The security code can be set optionally by operator.
Default setting is "0000".
Refer to page 45 when the security code is used.
Setting of security code
Press the
or
button to select security code.