-48-
No.PS##-OML0003-B
If the security code is forgotten
If the security code is forgotten.
The following mode is used only when the security code is forgotten.
<Operation>
Keep pressing the
button for 5 seconds or longer in the of measurement mode.
The current setting "UnL" or "LoC" is indicated.
Keep pressing
and buttons simultaneously for 5 seconds or longer.
Then, keep pressing
and buttons simultaneously for 5 seconds
or longer.
∗: There is no change of the indication.
(At this time, if the other operation is performed or no operation is performed
for 30 seconds or longer, the measurement mode returns.)
After that, keep pressing
and buttons for 5 seconds or longer. The indication changes to "0000"
and the security code changing mode returns.
(At this time, if another operation is performed or no operation is performed for 30 seconds or longer,
the measurement mode returns.)
Refer to "How to change the security code" on page 46 and decide the security code.
Changed security code is indicated.
Check and press the
button for 1 second or longer.
The measurement mode returns.
At this time, if the
, or button is pressed, changed security code is not entered and the change of
security code is asked.
To Next Page
Loading...
Need help?
General
