-46-
No.PS##-OML0003-B
•How to change the security code
At the time of shipment, the security code is set to [0000], but can be changed to optional one.
<Operation>
1, After the lock setting is finished (page 45), perform all three steps in the unlock setting procedure.
(page 45, "3,").
2, After the security code is inputted and the indication changes to [UnL], keep pressing
and buttons simultaneously for 5 seconds or longer.
[0000] is indicated and the change of security code is asked.
For how to input the security code, refer to "How to input and change the security code".
Changed security code is indicated.
3, After check it is as desired, press the
button for 1 second or longer.
The measurement mode is returned.
At this time, if the
or button is pressed, changed security code is not entered and the
change of security code is asked.
•How to input and change the security code
The 1 digit starts flashing.
Press the
or button to set the value.
Pressing
button starts flashing the 2 digits.
(If
button is pressed at the uppermost digit, the 1 digit
starts flashing again.)
After the setting is finished, keep pressing
button for
1 second or longer.
(If the operation is not performed for 30 seconds or longer
during input and change of the security code, the measurement
mode is returned.)
To Next Page
Loading...
