77/282
ENGLISH
Use and maintenance manual ßP700
4.7 STORING PROGRAMS AND MODIFICATIONS
Pressing the key [F3] you access to the machine's adjustment parameters.
To change the video page in the menu use the keys
[×] e [Ø]:
1 • Mode
Menu that displays the working cycle. See previous paragraphas.
Fig. 4.7.1
2 • Pack exit
Menu to adjust the belt's pace. (value 0-50)
Fig. 4.7.2
Using the keys [+] and [-] you increase or decrease the value of a unit.
This operation allows accumulation of more packs on the belt at a set time interval.
3 • Feeding bar pause
The feeding bar stops for the set time so that unstable packs can be placed in the
correct position. (value 0-15)
Fig. 4.7.3
Using the keys [+] and [-] you increase or decrease the value of a unit.
MODE
>AUTO< Manual
Exit parcel 1
M1
Pusher pause 10
M1
To Next Page
Loading...
