83/282
ENGLISH
Use and maintenance manual ßP700
6.1 ADJUSTING THE FEEDING BAR’S ROD
6.2 ADJUSTING THE FILM WINDING ROLLER
6.3 ADJUSTING THE FILM TENTION
Fig. 6.1.1
After having placed the product on the
working surface and placing it in the centre
of the feeding bar's platen 1, adjust the
rods working on the handles 2 as in fig
6.1.1.
Fig. 6.2.1
According to the height of the product that
is being packed, adjust the roller 1 placed
on the structure so that it is positioned on
the next mark compared to the height of
the pack.
Fig. 6.3.1
Upper and lower tensioning bars are
assembled onto the machine to keep the
film well stretched. The tensioning bars
also have to activate the operation of the
reels that wrap the film. Each tensioning
bar has counterweights that adjust the
position of the sealing. The optimal sealing
has to occur at about 10 cm from the lower
edge
6. SETTINGS AND ENTRY RECORDINGS
2
2
1
1
10 cm
To Next Page
Loading...