Copyright 12/14 8 S/N XXXX WO#XXXXXX
Smoracy, LLC
MODEL 3680
The words Danger, Warning, Caution, and
Notice are used on the safety decals and throughout
this manual, to make you aware of the safety
procedures. These procedures are very important, read
and obey them.
YOUR SAFETY IS VERY IMPORTANT TO US!
This machine is equipped with safety decals, guards
and designs for your protection.
Don’t ever take the machine for granted, always be
cautious and careful when operating your equipment.
Read and follow all the instructions in your manual
thoroughly. Your safety is dependent on your
knowledge of how to operate and maintain this machine.
You may obtain additional copies of this manual from
your Smoracy, LLC Dealer.
Before operating recycler, you must have all potential
operators; read and understand manuals, decals, and
watch the video tape and follow all recommendations.
Regardless of how hard a manufacturer tries to
produce a safe machine, accidents still happen.
Normally accidents are caused by people making
mistakes. They do not read the manual, they ignore
warning decals or do not use lockouts provided for their
safety. This normally happens after the person has
become accustomed to the machinery. In the initial
start up and operation of the machinery, they are
cautious, they are very careful because they do not
understand the machine.
This equipment is intended for use by personnel who
are experienced with similar equipment. Always
operate safely. It is also recommended that someone
else is present while operating or servicing in case an
accident should occur. Never operate any machine while
under the influence of drugs or alcohol.
Keep children, bystanders and animals clear of
working area. Never operate equipment that is in need
of repair or adjustment.
Before starting the machine, take a minute to check
a few things. The recycler should be in an area
restricted from people passing by. This area around the
recycler must be free of all objects that can obstruct
your movement when working with the machine. The
machine should be checked for loose tools or foreign
objects, especially in the infeed conveyor area. All tools
not in use should be secured in a tool box.
Operators must at all times be located within easy
reach of all feed control and shut-off devices when the
unit is running. Also always be observant and prepared
to activate controls to prevent an accident.
Do Not wear torn or loose clothing it is more likely to
get caught in moving machinery parts. Keep such items
as long hair, shirt sleeves, and shirt tails properly
contained. Avoid wearing necklaces, rings, watches,
and especially neckties while operating this machinery.
Make sure the machine is in excellent condition, and
all the guards are in place, tight and secure.
Wear all personal protection equipment and follow all
safety standards per ANSI and OSHA instructions.
Examples of equipment: hard hat, safety glasses,
gloves, ear protection, etc. Do not wear gauntlet or
secured fit gloves. Always keep a fully charged
type A:B:C fire extinguisher with the machine while
operating or servicing the recycler.
SAFETY PROCEDURES
SAFETY PROCEDURES
WARNING
DANGER
DANGER
To Next Page
Loading...