SMORACY BEAST 3680 - Maintenance Checklists (Daily, Weekly, Monthly)

Copyright 12/14 47 S/N XXXX WO#XXXXXX
Smoracy, LLC
MODEL 3680 MAINTENANCE
MAINTENANCE CHECK SHEET
WEEKLY
1) Check alternator and fan belts on engine.
2) Check, retighten hydraulic, fuel tank mount bolts.
3) Check, retighten wheel lug nuts.
4) Check Auger assemblies, and Auger chain.
1) Check hydraulic pressures.
2) Replace hydraulic oil filters.
3) Check towing hitch for wear, keep pintle ring greased.
4) Check and retighten all bearing lock collars.
5) Grease cutterhead bearings with 16 pumps of synthetic grease.
MONTHLY
DAILY
1) Check the safety decals, replace if damaged.
2) Check all guards and shields.
3) Check entire machine for loose nuts and bolts.
4) Check Cutterhead assembly.
5) Check
condition and clearances of Cutterbody, Cutterteeth, and Raker Inserts.
6) Check and/or adjust Cutterhead drive belt tension.
7) Check hydraulic pump and motor drives.
8) Check air cleaner, pre-cleaner.
9) Check radiator, debris screen.
10) Check engine oil and coolant levels.
Follow ENGINE MFG. manual specifications.
11) Check hydraulic oil level.
It is highly recommended that after initial start-up of the recycler and after any replacement of
hydraulic components, that fittings and hoses be re-checked for leaks and clearances.
12) Check for oil, fuel, hydraulic oil, or engine coolant leaks.
13) Grease all bearings (except Cutterhead bearings).
14) Check clutch engagement, tension and lubrication.
Frequently adjust and grease, per PTO manufacturers manual.
15) Check Infeed Conveyor chain tension and tracking.
16) Check the drive chains for the Infeed Conveyor and Augers.
17) Check the Screen and Concave Door assemblies.
18) Check Screen and Concave Door bolts.
19) Check Discharge Belt Conveyor.
20) Inspect axle dust caps and assembly.
21) Check tire air pressure.
22) Remove all potential fire hazards (wood debris, fuel, oil, etc.)
23) Engine Air Intake and Exhaust Components for missing or loose nuts, bolts or clamps.