8
Networking
5. Using your mouse pointer click on <Setup> but-
ton. If a mouse is not used a simple nger touch
will select any button when touched.
6. Select the “Systems” tab at the top of the page.
NOTE: THE SERIAL NUMBER AT THE BOTTOM
OF THE SCREEN. MAKE NOTE OF THIS
SERIAL NUMBER AS IT WILL BE USED
WHEN CONNECTING THE SYSTEM AD-
MINISTRATOR PC WITH THE ATC TOOL-
BOX.
7. Select the <Network Settings> button.
8. The User is presented with a Windows Network
Connections menu. The illustration to the right
shows that the toolbox is NOT CONNECTED to a
wireless network.
9. Any specialized network conguration changes
required by the individual responsible for the ATC
local area network should be performed at this
time.
To Next Page
Loading...