9
Networking
10. Using the mouse pointer right click on the “Wire-
less Network Connection”.
11. Using the mouse click on the option “View Avail-
able Wireless Networks”.
12. The system will pull up all network connections
that are available within it’s wireless range. This
range is dependent on the location of the Wire-
less Access Point better known as a WAP. For
this manual our system located several Net-
works. We will be using the “CO2” Wireless
network.
13. Double click on the desired network. The wire-
less security used at the job site will determine if
a password will be required to join the network.
For our system a password is required. Care fully
enter that password. The network password is
case sensitive and must be entered exactly to
connect. Once entered click on the <Connect>
button.
To Next Page
Loading...