19
ATC Toolbox Setup
HIGH ACCURACY DRAWER TRAINING
After completing either a Complete Drawer Training or an
Abbreviated Drawer Training the following procedure may
be used to achieve the highest level of accuracy. This pro-
cedure will require the removal of all tools from the drawer
being trained.
Select the drawer requiring High Accuracy training.
Select the drawer to be trained then select “Train Drawer”
to begin.
The ATC unit will display the message to the right stating
that the cameras have already been trained and do you wish
to proceed. Select “No” to proceed.
The next step asks if you would like to gather images with
tools absent. Select “Yes” to continue.
The next step requires all tools to be removed from the se-
lected drawer only.
Slowly close the drawer.
The next step asks if you would like to gather images with
tools present. Select “No” to continue.
This drawer has been trained.
Press Done to return to the Home menu.
To Next Page
Loading...