13
Operation Using the LED Spotlight
4.8 Using the LED Spotlight
An LED spotlight is provided to illuminate areas of low light.
Select the spotlight icon in the toolbar (Figure 4-12), then press the Y button to turn the LED
spotlight ON/OFF.
Figure 4-12
The spotlight has three intensity levels, to change the light level, see Spotlight Intensity on
page 18.
i When the battery reaches a low charge level (approximately one bar indication on icon), the LED
spotlight is disabled. The spotlight will be functional again when the battery has been charged to
approximately 30%. Always turn the spotlight off before and when charging the battery.
i The battery discharge rate will vary depending on overall use and settings. To optimize battery life
when using the spotlight, use the spotlight at brief intervals at a low intensity level.
To Next Page
Loading...
Need help?
General
