Using the Phone
Number guessing (auto completion)
Note: The default setting for Number guessing is "off". To be able to use it, open the
phone's web interface to Advanced > Behavior > Phone Behavior, change the setting
to "on", and enter the minimum number of characters you must enter before number
guessing will start.
When you dial and have typed the minimum number of digits, the phone will propose numbers
containing the typed string from the numbers saved on its call lists and in the directory. When the
desired number is on the display, press
to dial.
In the following example, the minimum number of characters is four:
Accepting calls
Using different audio devices
Handset: Pick up the handset.
Headset: Press
or the blinking line key.
Speakerphone: Press
.
Automatically accepting calls
The default is "off". Turning the function on: On the phone's web interface > Configuration Identity #
> SIP tab > Auto answer: Click on the radio button "On".
With this setting, your phone will automatically accept incoming calls when the phone is idle:
• If your are using Firmware version 8.7.2 and higher, calls will be accepted on speakerphone; press
the headset key
if you want them to go to the headset.
• Firmware version 8.7.1 and lower: Open the phone's web interface to the page Preferences >
Auto Answer > Type of Answering and select "Handsfree" (speakerphone) or "Headset" from the
drop-down menu.
If you want to be alerted acoustically by a single long beep, whenever the phone accepts an incoming
call, you need to change another default setting on the phones's web interface from "Off" to "On":
Preferences > Auto Answer > Auto Answer Indication.
To Next Page
Loading...
