Snom 760 - Turning on Forwarding of All Calls with a Programmable Function Key; Turning off Call Forwarding

57
snom 760 User Manual
Using the Phone
Turning on forwarding of all calls with a programmable function key
If the function key
is not available when the display is in idle mode, you can make it available on
the Function Keys page of the phone's web interface. For further information see "Configuring the
function keys" on page 58 .
1. Press
. The display will show the "Target when Forwarding" screen.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press
.
Turning it off
Press
.
Turning off call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2
ABC
2 Call Features
2
ABC
2 Call Features
2
ABC
2 Call Features
Press
1
1 Call Forwarding
1
1 Call Forwarding
1
1 Call Forwarding
Press
1
1 Forward All
2
ABC
2 Forward when Busy
3
DEF
3 Forward after Timeout
Press
1
1 Enable forwarding [Yes]
1
1 Enable forwarding [Yes]
1
1 Enable forwarding [Yes]
The menu item changes to "1 Enable forwarding [No]". Press
for two seconds to return to the idle
screen.
Turning off forwarding of all calls with the programmable function key
Press
.