69
User Manual M65 / M85 / M25 Using the handset
Loudspeaker/microphone settings
Adjusting volume of handset and external loudspeaker
• M85 and M65: Press the upper (+) or lower (-) end of the volume key.
• M25: Press the upper (+) or lower (-) rim of the navigation key.
For more information, see "Volume key" on page 40 .
Muting/Unmuting the microphone
• M85 and M65: Press the Mute key.
• M25: Press the left rim of the navigation key.
For more information, see "Mute key" on page 40.
Transferring a call
Active calls can be transferred manually to a third party either with prior announcement (attended
transfer) or without prior announcement (blind transfer). Ringing calls can be transferred manually
to a third party without prior announcement (blind transfer).
Attended transfer
1. With a call on the line, press the function key underneath "Hold" to put the call on hold.
2. Call the party to whom you want to transfer the call.
3. If the party agrees to accept the call, press the function key underneath "Transfer". The two
parties are instantly connected, and your your display will announce that your call has ended.
Blind transfer (unattended transfer)
1. With a call on the line or an incoming call ringing, press the function key underneath "Transfer".
2. Enter the number of the party to whom you want to transfer the call on the display.
To Next Page
Loading...
