socomec Masterys BC User Manual

21
ENGLISHENGLISH
MASTERYS BC 100-120 kVA - Ref.: IOMMASBCXX07-EN 05
2. UNPACKING AND INSTALLATION OF THE UNIT
2.10.1-1
Recommended parallel confi guration
Key
A Selective general di erential magneto thermal switch
B Parallel bus cable
C Single UPS magneto-thermal switch (if a separate
auxiliary power source is used add a magneto-ther-
mal switch for each UPS)
D
(1)
Additional disconnectors on the distribution panel
E
(1)
System shutdown switch
F Distribution
(1). To avoid unwanted tripping, do not use the
magneto-thermal switch.
20 m max
25 m max
A
UPS1 UPS2
B
C
C
D
E
F
2.10.1. Recommended 1+1 parallel confi guration

socomec Masterys BC Specifications

General

Frequency	50/60 Hz
Power factor	0.9
Protection Degree	IP20
Input Voltage	400 V three-phase + N
Output Voltage	400 V three-phase + N
Efficiency	Up to 96%
Battery Type	VRLA
Operating Temperature	0 to +40 °C
Relative Humidity	0% to 95% (non-condensing)
Cooling	Forced air
Communication Interface	RS232, USB
Dimensions	Varies by model (e.g., 650 x 800 x 1200 mm for 20 kVA)
Weight	Varies by model (e.g., 300 kg for 20 kVA)
Topology	Double conversion