socomec MASTERYS GP4 User Manual

69EN
MASTERYS GP4 60-160 kVA - Ref.: IOMMASGPXX07-EN 05
15. TECHNICAL SPECIFICATIONS
Models
MASTERYS GP4
160 kVA120 kVA100 kVA80 kVA60 kVA
3/3kVAInput/Output phases
Electrical specifications - Input
3ph + N 400 Vac (-15/+20%) up to -40% @ 70% of nominal loadVinMains voltage
Input frequency
40-70 ±10%
Hz
Input power factor ≥ 0.99
Current distortion (THDi) ≤ 2% (@: Pn, Resistive load, Mains THDv ≤ 1%)
Electrical specifications - External battery
from +/- 200V batBattery voltage range
(3)
up to +/- 330
(4)
Electrical specifications - Output
3Ph+N 380/400/415 V ±1%VOutput voltage
(1)
50-60 Hz (selectable) ±0.01%HzOutput frequency
1601201008060kVANominal apparent power
1601201008060kWNominal active power
Overload
(@ 25 °C; Vin > 380)
(2)
10 minutes
kW
20015012510075
240180150120901 minute
Crest factor ≥ 2.7
Voltage distortion (THDv)
≤ 1% (@: Pn, Resistive load)
≤ 5% (@: Sn, non-linear load)
Electrical specifications - Bypass
Nominal output voltage ±15% (±20% if GENSET is used)VBypass input voltage
50-60 ±2% selectable (±8% if GENSET is used)HzBypass input frequency
Environment
0-40 (15-25 recommended)°COperating temperature
-5 to 50°CStorage temperature
up to 95% (condensation-free)%Relative humidity
1000 (without derating)mMax. altitude
< 57< 55< 53dBAAcoustic noise (@ 70% Pn)
Air coolingCooling type
mRequired cooling capacity
3
14401080840720480/h
Dissipated power max at Pn
nominal condition
80005940480039502880W
272972028016388134869833BTU/h
Dissipated power max at Pn
worst condition
93506560550046303360W
3190422397187781580711471BTU/h
Standards
EN/IEC 62040-1, AS 62040-1Safety
EN/IEC 62040-3, AS 62040-3Type and performance
EN/IEC 62040-2, AS 62040-2EMC
CE - IECEE CB SchemeProduct certification
RCM - EAC - CMIMProduct marks
Protective Class IProtective class
< 1 mATouch current
IP20; IP21 (option)Protection level

socomec MASTERYS GP4 Specifications

General

Brand	socomec
Model	MASTERYS GP4
Category	UPS
Language	English