OFYS RT 1 - 3kVA - 551906A - SOCOMEC
9EN
3. ENVIRONMENTAL REQUIREMENTS AND HANDLING
NOTE!
Before carrying out any operations on the unit read the ‘Safety standards’ chapter carefully.
3.1. Environmental requirements
The room must be:
• Of a suitable size;
• Clean and dry.
• Free from conductive, inammable and corrosive items;
• Not exposed directly to sunlight.
The unit is designed for indoor installation only.
The unit can be housed in a rack independent cabinet of 19”. The hosting rack must have front and back opening for
air ow. The cold or ambient temperature air inlet is on the front; the hot air outlet is on the back. Connections must be
accessible from the rear.
NOTE!
It is necessary to guarantee the front inlet air ow and the rear output air ow.
Be certain that a clearance of at least 20 cm is left on both sides to ensure adequate ventilation and provide
access to the rear panel.
3.2. Handling
• The packaging guarantees the stability of the unit during shipping and physical transfer.
• Carry the packaged units as close as possible to the installation site.
The battery units MUST be handled by at least two people. The people MUST take position at the sides of the
UPS with respect to the direction of movement.
WARNING!
Failure to heed this warning could result in the unit falling over, equipment damage, injury and even death.
3.3. Unpacking
The UPS comes with disconnected batteries inside.
CAUTION!
Do not lift or move the product using the front plastic cover as you may damage or break it and cause injury
to yourself in the process
WARNING!
Heavy Weight!
Up to 30kg
To Next Page
Loading...
