Sofar 1.1KTL2-G3 - Page 38

SOFAR 1~4KTL2-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 32 -
Inverter is equipped with two types of IP66 AC connector (Type Ⅰ
connector or Type Ⅱ connector are randomly equipped with one) ,
and the AC output cable needs to be wired by the customer. The
appearance of
AC connector
is shown in figure 4-11.
AC connector type:
Figure 4-11 (1)
Type
Ⅰ
connector
Figure 4-11 (2)
Type
Ⅱ
connector
Type
Ⅰ
connector installation instructions
Step 1 Select appropriate cables
according to Table 4-2, Remove the
insulation layer of the AC output
cable using a wire stripper according
to the figure shown below:
Step2 Disassemble the AC
connector according to the figure
shown below: insert the AC output
cable (with its insulation layer
stripped according to step 1)