1
System Components
iSTAR Edge is a smaller, cost effective, 2 or 4 reader iSTAR that can be powered over its
Ethernet connection using PoE, and is suitable for placement above or near the door. iSTAR
Edge can be clustered with other iSTAR Edges and iSTAR eXs.
UL has evaluated and approved firmware version 5.1.x.xxxxx where 'x' may indicate any
numeral representing minor revisions or debugging.
iSTAR Edge has:
8 onboard inputs plus 32 or 64* optional I8 inputs
4 onboard relay outputs plus 32 or 64* optional R8 outputs
2 onboard direct connect Wiegand reader connectors
3 serial ports for RMs, I8s, I8-CSIs, and R8s.
2 AUX power outputs for PIRs, etc.
* 4 Reader model supports 8 I/8s and 8 R/8s.
UM-245 Version A3
June 2011
iSTAR Edge
Installation Quick Start Guide
NOTE
iSTAR Edge requires the following minimum versions:
C•CURE 9000 version 1.93 (for 2 or 4 reader models)
C•CURE 800/8000 version 10.0, 10.1 (for 2 reader model only)
To Next Page
Need help?
General
