Connections
26
In a special case, such as needing a Star configuration in four directions, it is
possible to turn off the Edge terminator and use a Y type of connection from the
RM port. Figure 10 shows an example of how that special case could be wired.
FIGURE 10. RM Terminators
Inputs
There are eight onboard inputs available on the iSTAR Edge.
FIGURE 11. Inputs
NOTE The 4000 foot maximum is measured from terminator to terminator.
NOTE
This example shows a fully loaded iSTAR Edge - 2 Readers, 4 - I8s, and
4 - R8s.